Description
Applications
Heavy duty industrial degreaser for removal of heavy greases and oils. Ideal use for removing grease and oil marks off concrete and hard surfaces Pressure washer additive for heavy degreasing and stain removals.
Physical Properties
A brown liquid with solvent odour, high foaming.
Chemical Properties
POTASIUM HYDROXIDE
Strong caustic-based formulation with penetrating surfactants and organic solvents for extra cleaning
Environment
RTU (diluted for ready to use) has been determined to have low aquatic toxicity, does not persist in the
environment, and has a low potential to bioaccumulate. All surfactants are readily biodegradable.
Directions
- Remove as much contaminants as possible
- Spray or foam on using appropriate dispensing systems
- Allow 5 to 10 mins contact time
- Agitate or brush if needed
- High pressure off or rinse off with fresh water.
Dilutions
General Cleaning and Degreasing:
Medium Duty – Dilute 1:50 with water
Heavy Duty – Dilute 1:10 with water
Pressure Cleaning: Dilute up to 1:100 with water depending on requirement
Cautions
Avoid skin and eye contact and breathing of vapours. The use of gloves and eye protection is
recommended. Use with care on painted surfaces and be sure to wash off promptly. Not recommended
for aluminium or galvanised surfaces
Disclaimer: The information provided in this technical data sheet is based on our current knowledge and experience with bore stain remover. However, it is the user’s responsibility to ensure the suitability and safety of the product for their specific application. We recommend conducting compatibility and performance tests before full-scale application.
Reviews
There are no reviews yet.