Bore Stain Remover

Description

Bore Stain Remover is a specially formulated solution designed to effectively eliminate Bore water stains from
various surfaces. It combines the stain-lifting power of Urea Hydrochloride with surfactants to penetrate and
dissolve bore water stains, restoring the surface to its original appearance without causing damage.

Physical Properties:
Appearance: Clear yellow liquid
Odor: Mild
Soluble in water

Chemical Properties
Urea Hydrochloride blend
Low pH
Surfactants and Water Based

Directions for Use:

1. Use as supplied. Apply to a dry surface for best results.
2. Apply the Bore Stain Remover directly to the area using a watering can or low-pressure spray.
3. Allow the solution to sit on the stain for a few minutes to penetrate.
4. Gently scrub the stained area with a brush if needed.
5. Rinse the surface thoroughly with garden hose or pressure cleaner to remove the residue.
6. For stubborn stains, repeat the process as necessary.
7. The use of an alkaline liquid can be used to wash down area if neutralising of the product is needed.

Coverage
Average coverage is ~ 80 – 100 m2 Spray application yields best coverage

Precautions:
Use in a well-ventilated area.
Wear gloves and eye protection when handling the product.
Avoid prolonged skin contact. In case of contact, rinse thoroughly with water.
Keep out of reach of children.
Do not mix with bleach or other chemicals without proper guidance.
Test the product on a small, inconspicuous area before full-scale application.
Use with caution on galvanized or exposed metal and ally surfaces as damage may occur.

Disclaimer: The information provided in this technical data sheet is based on our current knowledge and experience with bore stain remover. However, it is the user’s responsibility to ensure the suitability and safety of the product for their specific application. We recommend conducting compatibility and performance tests before full-scale application.